CYSTAGELIGHT HK limited
During program running, the program will run in preset speed when SPEED & CROSS faders at AUTO position otherwise the running speed will be total amount of current SPEED & CROSS faders. When run Chase and environment program, press CROSS ode button to change CROSS mode between all channel mode or only X/Y mode. After set PAN/TILT wheel, the faders.
DMX512/1990 standard 512 DMX control channels.
4 outputs with separate optical isolated.
Up to 32 scanners may be connected with a maximum of 16 channels each.
A large back light LCD to display operation parameters.
16 channel faders plus 1 speed and 1 cross control fade.
1600 chase steps maximum. 48 chases - up to 99 steps each. Speed and cross time of each step can be set separately. Speed adjustable by music active or manual mode.
SPEED fade time range is 0.01s-25.5s and CROSS fade time range is 0s-25.5s and the total time amount of current status will be program step time.
48 scenes can be used directly.
8 chases and 48 scenes can run at the same time. And 32 scanners can be selected together.
The X/Y channels of different fixtures can be controlled by PAN/TILT wheel together.
16 Bit control for PAN/TILT fine adjustment.
15 environment programs to output the combination, which are composed of different scenes, chases and manual output quickly.
The music trigger source can be selected between audio line input or internal microphone.
Easy to learn and operate.
The Data auto-saves. (Through the electronic memory storage and it can be changed freely).
High performance switching power supply, with extremely low power harmonious distortion and wide range of voltage, suit for the requirement of different country simultaneously.
LED lamp connector.
Power input: DC9V 1000mA.
Dimension: 498mm × 420mm × 115mm.
Net Weight: 6.5kg.
Copyright © CYSTAGELIGHT HK Co., Ltd.
All Rights Reserved
Technical Support: 
